Search the Community

Let me finish this complex airport. INTRODUCING LAGUARDIA INTERNATIONAL AIRPORT, QUEENS, NEW YORK, UNITED STATES. This airport is currently under construction (in real life and in my computer) and it will be released [under construction]. Do not expect the mock up version. American Airlines hangars will remain and we don't know for how long. And several other buildings are still intact and this is how I want to release this airport... on it's current state. Updates will be met. When a building goes down and when a new one goes up, expect updates.

Now you have a reason to fly to the Caribbean. Las Americas International Airport (also known as Jose F. Pena Gomez) is an international airport located in Santo Domingo, Dominican Republic. MDSD usually receives a wide variety of long-, mid- and short-haul aircraft, airliners, charter, cargo, and military missions’ flights. The airport is the second busiest in the country after losing its traffic frequency to Punta Cana International Airport, yet it is one of the largest in the Caribbean, handling 3.5 million passengers in 2017 through its air terminal. And is also the busiest cargo hub in the Caribbean and Central America with 405,000,000 lbs. of cargo (this is a lot for a small location) transported in 2020. For its size and location, it is basically a busy airport.

ALL THE CUBAN AIRPORTS UPDATE FOR P3D v3 On the WAY !!!!! dejen comentarios...

NOTE: Please read this post and the disclaimer carefully. This installation is not a "press this button and get the result" thing. It is farely complex and requires some computer knowledge. I tried to provide easy instructions but if you do not know what AppData and ProgramFiles directories are, you shold NOT do this, I'd strictly advise against it. The night lighting of the jetways used here is not particularly good and if you want maximum compatibility, please continue to use the orignal T2G Jetways. Hi, as you might know, I made a package of Terminal 2 SODE Jetways for EDDM wich was highly welcomed, BUT I made the mistake to share files that were protected under the copyright of Taxi2Gate. I 100% agree with that being a mistake by me, I was not aware that I violated copyright at that moment. I eagerly awaited the P3Dv4 update for EDDM and as many of us hoped we now have SODE jetways as a standard at this airport, but as it is my homebase, it had to get more love than just not carefully placed, non-glass jetways. Now I want to share, how I placed those way more realistic looking glass jetways with you, without sharing any files that are protected by copyright - meaning you'll have to modify your own installations of the two airports used here, I can only provide the instructions on how to achive what I show you in these screenshots. Also I made the process easier for you by providing files that I did create and that are NOT violating any copyrights. For installation you will need the Drzewiecki Design EPWA X airport, the updated version of EDDM for P3Dv4 (it will not work with the versions for FSX (SE) and P3D up to v3) and some concentration, as YOU will have to customize your installations. In the download file you will find my own .xml, an installation and uninstallation guide, my GSX.ini file for the whole airport and a modification file to enable use of Terminal 1 Jetways with Boeing 777 and 747 airplanes. I recommend the use of GSX, as I fitted and tested all parking positions to the individual aircraft types and jetways. Also this will get you SafeDocks at the correct gates. FAQ: Q: Jetway out of range? A: I can only gurantee that all jetways work in the parking positions that I've put into the GSX.ini Q: SafeGate does not work! A: upon arrival after landing, select the gate in the GSX menu, it will then be activated Q: Can you replicate this at other Airports? A: depends on each individual airport, definitely not for Aerosoft sceneries Q: Why not make the original jetways glass? A: move your camera inside one of those, you'll see the jetway disappearing, that's what happens if I change the texture to glass DISCLAIMER: neither T2G nor Drzewiecki Design are aware of this and if you feel that this project of mine is a spoil or that any of the parties involved will take a loss in me doing this, I will immediately remove all files upon asking. I do not want to hurt anybody or any company by doing this. I removed all files that are protected through T2G's or Drzewiecki's copyright and either wrote into the installation instructions where to get those files OR replaced them with files that I created. As of now, while writing this, I am not aware of any laws that I would be breaking or copyright that I'd be violating. If this is the case though, please contact me and I will happily take all files down! If you are an admin of this forum feel free to delete the post if it violates any rules that I'm not aware of. EDIT: New files below

Hello , I just bought Linate for p3d v4. Excellent airport ! But I noted that, during night, the (dynamic) lights are very very strong, too bright. I have this problem only with this airport. What can be the cause ? (I already have tried to delete my shader folder). Thank you

Hi there For users willing to install LFML X 2013 into P3D, please do not forget to copy and paste the file LFML_ADEX_TLG_ALT.BGL into \Prepar3D v2\scenery\World\scenery . This is a very important step in order to get the scenery working with P3D. Also wanted to share a few P3D in-game shots showing the great dynamic shadows you can get with the scenery (unedited screenshots) Best regards,

Runway light fix for people, who use taxi2gate's KMCO (Orlando Intl) and have no runway lights with prepar3d v.2.5: http://www.pprod.ch/T2G/Mods/P3Dv25_Mod_KMCO_RnwLights.zip Install-Readme included in the .zip file. Best regards Pete

Hi there Here are the first previews from our next project: Metz Nancy Lorraine Airport in France. Metz Nancy Lorraine is a French regional airport serving both Metz and Nancy cities, which are located in Northeast of France, one hour drive from the German and Luxembourg boarders. The scenery will be available for FSX / P3D and FS9 a few weeks later. Please take a look at the preview pictures (this is of course a work in progress, what you see in the previews is not the final product):