Kim07 0 Report post Posted December 31, 2017 Hello, Bought your scenery today and it is great ! (Hopefully you'll do some more *cough* Biarritz *cough* Orly *cough* ) I don't have a very strong system since he's becoming older and older, but an OK one (i7-3770k - not overclocked - and GTX670 with 8GB of RAM), and am flying the FSLabs. I manage to have ok fps to me (20-40) at any stage of the flight by any weather/time, maybe a bit less at night but that's just fine. I'm already playing with 1024 textures in my sim, airplane and weather engine. I manage aswell to get those fps at airports much bigger than LFRS such as LFPG from T2G etc... However, I'm very laggy at the apron of Nantes (like really), this does only occur at the apron and only when I'm looking to its direction, and I suspect the kind of "lightning" to be the cause of it. I thought it was the dynamic lightning (since in my cockpit it's lighten just like I had the dome light on) but the issue still persists after disabling it. Maybe a clue about what my problem could be, or some bgl or fx files I could delete to improve performances ? Thanks! I joined a few screenshots if that might help. My order id is : 1773207 PS : I did the updates available on your site regarding the scenery. Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 1, 2018 Hello Kim, Thank you for the detailed explanation. Do you have the low FPS at night only? We'll try to find out the file which could be the FPS-heavy one on your system. Best regards, Thomas 1 Kim07 reacted to this Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 1, 2018 Hello, Just made the experience and indeed I have no problems at day time, it starts to occur at dusk and continues at night. Thanks for your help, Alex. Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 2, 2018 Hey, Actually I just remembered that I got the exact same issue in Marseille (I got P3DV4.1). Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 3, 2018 Hello Alex, can you try the following: Open folder C:\ProgramData\12bPilot\SODE\xml and look for JSD_LFRS_obj_DL.xml.off and JSD_LFRS_obj_NoDL.xml . Cut and paste them into a backup folder (so they are not into C:\ProgramData\12bPilot\SODE\xml anymore). This will deactivate the custom ground lights, but this is just to check if these files are the FPS-heavy ones on your system. If affirmative, I'll send you new files Best regards, Thomas Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 3, 2018 Hello Thomas, I removed the two files and it didn't change anything unfortunately. I really have the feeling that it's related to the lightning indeed (since it only happens at night), the very one that illuminates my cockpit just as in the second screenshot (the dome light was off). As I said, this issue is aswell happening at Marseille. My order id of LFML is : 1656342. PS: On your scenery configurator I just noticed that one option is named "Dynamic lightning compatibility", does it remove dynamic lightning ? I tried either way and it didn't change anything but I have the habit to remove the dynamic lightning as it's heavy on performances so might be that. Regards, Alex. Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 5, 2018 Hello Alex, Now I understand. I think you have the Dynamic lights option enabled into your P3D. When using the "dynamic lights compatibility - OFF" option on our Scenery configurator, you still need to disable the dynamic lights option in your P3D Graphic options. This should solve any issue with FPS at either LFRS or LFML (and indeed, your PC is not able to handle the quite FPS-heavy Dynamic lights option). Don't forget to put back files JSD_LFRS_obj_DL.xml.off and JSD_LFRS_obj_NoDL.xml into C:\ProgramData\12bPilot\SODE\xml Hope this helps! Thomas Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 5, 2018 Hey, Indeed I have the "Dynamic lightning" enabled in my P3Dv4, the issue is that I need this option in order to see my landing lights illuminating the ground huh... No walk-around possible in that case ? Alex. Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 5, 2018 Give me a few days and I'll be able to send you a new file allowing you to use the dynamic lights on your aircraft and not on the terminal Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 5, 2018 Hi, Roger thank you, nothing urgent tho take your time let me know when it's ready ! Got a few exams next week anyways Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 9, 2018 File sent to your e-mail Best regards, Share this post Link to post Share on other sites
stijnsarah18 0 Report post Posted January 11, 2018 Can you send me the file too? i have dynamic lightning enabled also for landing light on ground but don't want it on terminal etc.... can you send it to me? thanx! Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 11, 2018 Hey, I just replaced the file you sent me (thanks), so the lightning indeed disappeared but I'm afraid I still got very low fps at the apron. I have, this time, no idea of what might cause this :S Best regards, Alex. Share this post Link to post Share on other sites
JetStream Designs 25 Report post Posted January 12, 2018 Hi Alex, Maybe I deactivated the DL on the terminal only. I will check if there still are DL effects ON, and will contact you again soon Stijnsarah18, can you please send me your order number by email or private message, so I can send you the files Best regards, Thomas Share this post Link to post Share on other sites
Kim07 0 Report post Posted January 12, 2018 Hey Thomas, Thank you again appreciate it! Still, take your time I initially thought that it could be my system, but as said previously I got airports like T2G LFPG and I have no problems of that kind. Without DL tho. Maybe putting an option to disable it in the scenery config for the next sceneries would be an idea Regards, Alex. Share this post Link to post Share on other sites
