gianluk81 0 Report post Posted November 4, 2018 Hi guys, i have this problems with lights poles...see the photo for detail. In some areas have a lamp of lights position at ground and not at top of poles. Please help me to resolve this issue. Thanks! Quote Share this post Link to post Share on other sites
JetStream Designs 29 Report post Posted November 5, 2018 Hi Gianluk81 Setting a mesh resolution setting of at least 5m (even better is 2m or 1m) will solve this issue Best regards, Thomas Quote Share this post Link to post Share on other sites
gianluk81 0 Report post Posted November 5, 2018 Hi, yes...switch from 5m to 2m and resolve problems! Thanks for assistance! Have a one question... It's possible insert a left PAPI on rwy 03? Quote Share this post Link to post Share on other sites
JetStream Designs 29 Report post Posted November 5, 2018 Here you are LFRS_PAPI03.zip Quote Share this post Link to post Share on other sites
gianluk81 0 Report post Posted November 6, 2018 Oh my good!!! Very very good reply!!! Many thanks...now LFRS it's full complete Quote Share this post Link to post Share on other sites
