Jump to content

Paris Orly P3D 5.1 Hotfix 1


Recommended Posts

Similar problem for me with P3DV5.1HF1. 
And even loss of the southern part of the National Road 7 tunnel  underneath  the airport. 
Everything is flat in the south while everything is OK in the north.

Please don't forget the customers of the other flight simulators who are always there.


Link to comment
Share on other sites

Well, you are not the developer, but I have this problem on T2G Paris CDG, so it must be a problem with P3D 5.1 hf1 ... I am afraid that there will be forced to update all airports .. if it is the case, this problem will be present on many other airports not updated ?


Thank you jetstream for keeping your airports up to date, it's nice !   ?



Link to comment
Share on other sites

On 12/7/2020 at 12:40 PM, JetStream Designs said:

Some things changed indeed with how P3D deals with "flattens" in V5. Do you still fall in the hole if you closely follow the taxiline?

Yes at least for my aircrafts with P3DV5.1HF1

As I said in my previous post there are 2 main issues:
1-National road number 7 in its southern part is completely flattened.

That road no longer passes below the airport, which is one of the great qualities of realism displayed in this scenery.

2- Hazardous driving areas are located on the side of the overpass platforms. So the largest aircrafts have chance to pass through.

Here are some pictures of what's going on :


North Road N7 is OK.png

Dangerous Taxiway W36.png

Fall in the ditch W36.png

Hazardous Taxiway W1.png

Fall in N7 Road.png


Link to comment
Share on other sites

  • 2 weeks later...
On 12/19/2020 at 10:15 AM, JetStream Designs said:


Just to make sure, is the JetStream Designs Paris Orly terrain area above JetStream Designs Paris Orly in your scenery library? This is for the Nationale 7 to show properly.


Yes it is 


An update for Christmas? it would be great!




Link to comment
Share on other sites

Correct, this time it's fixed, bravo.
If you allow it, just some details: 


This little grey triangle if it could be replaced by the concrete texture ?



Here a space appears under the concrete beam and it may have a link with the below picture


There is still a small area to fixup to the concrete beam. 


And on the other side the same thing but the area is bigger.

But if it's an issue, it's not a big deal, the main thing is that we can run on the taxi bridges.

And what is curious is that if the wing of my ultralight hits  the concrete beams 
it emulates a shock as in reality. What is your magic wand?

Thanks again for your great job.


Link to comment
Share on other sites

22 hours ago, JetStream Designs said:

I will take your suggestions into account for a next update ;)

Sorry but I've just made a test, this time with an A330 airliner and here is what happens when passing bridges despite the last fix.
The aircraft seems to make a jump when passing the bridges.

Orly-LFPO_Taxiway Bridges_Issue

So I think it's better to check all this before releasing an update.

Yet, despite this, I am optimistic and I wish all simmers (P3D,XPlane, MSFS2020) a Merry Christmas.

Link to comment
Share on other sites

  • 1 month later...

  • Create New...